Earthquaker Devices Ledges
Tri-Dimensional Reverberation Machine
Ledges is a three-mode reverb with the ability to save and recall six presets and user-assignable expression control with loads of customizable options.
From classic, standard reverb tones to undiscovered sonic reaches, it’s everything you’ve ever wanted and needed out of a reverb.
The three switchable modes each deliver a unique blend of reverb, but are connected through a spectrum where the Room (R) reverb’s longest setting is the Hall (H) reverb’s shortest setting,
the Hall reverb’s longest setting is the Plate’s (P) shortest setting, and the Plate’s longest setting just keeps on going.
The Room setting at its shortest achieves a small, boxy room sound that gradually gets bigger as you turn it up.
As you increase the Hall setting, it morphs into a Cathedrals™-style reverb that becomes really big, boomy and echoey with distant reflections.
Turn up the Plate setting to get bouncy reflections that recycle and reverberate forever.
Main Features:
• Reverb effects pedal
• From classic, standard reverb tones such as 80s slapback reverb to a bigger room spring reverb styles and big, boomy and echoey cathedral-like hall reverb
• 3 effects modes
• Mode R: The Room setting at its shortest achieves a small, boxy room sound that gradually gets bigger as you turn it up
• Mode H: The Hall setting becomes really big, boomy, and echoey with distant reflections
• Mode P: The Plate setting creates bouncy reflections that recycle and reverberate forever
• 2 modes of operation:
• Live Mode – Green LED- pedal will operate exactly where the controls are set, any changes will have no effect on the presets unless saved
• Preset Mode - red LED - recalls stored settings for each control, actual control settings will be ignored
• 6 easily user-editable and accessible preset slots
• Silent soft-touch relais-based switching with Buffered Bypass and trails
• Flexi-Switch Technology for latching and momentary operation
• EXP jack with user-assignable expression pedal or Voltage control pedal control over any parameter
• All-analog dry signal path and digital effect signal path
• Made in Akron, Ohio, USA
• Powered by regular 9 V DC PSU
(centre -, 2,1 mm, 75 mA current draw)
-
Tuotenumero 1061508
EB-6225, Flat Patch Cable 7,5 cm
Flat patch kaapeli, 7,5 cm
€9,00/kplLähetettävissä: Heti Myymälässä
-
Tuotenumero 1043253
Palmer Pedalbay 40
Kevyt ja kompakti pedaalilauta, jossa pehmeä suojakotelo (45 cm)
€69,00/kplLähetettävissä: Heti Myymälässä
-
Tuotenumero 1001217
AMP CD-6
CD-6, virranjakokaapeli efektilaitteille. 1 in/5 out virranjakokaapeli.
€6,90/kplLähetettävissä: Heti Myymälässä
-
Tuotenumero 1061507
EB-6224, Flat Patch Cable, Multipack
Paketissa yleisimmät pituudet pedaalilautaa varten
€78,00/pakLähetettävissä: Heti Myymälässä
-
Tuotenumero 1061505
EB-6221, Flat Patch Cable 15 cm, 3-pack
Flat patch kaapeli 15 cm, 3-pack
€28,50/pakLähetettävissä: Heti Myymälässä
-
Tuotenumero 1066630
Ernie Ball EB-6191 Volt Power Supply
Volt - erittäin kompakti pedaalivirtalähde
€137,00/kplLähetettävissä: Heti Myymälässä
-
Tuotenumero 1077945
PRS Barefoot Button Bird Logo
Button to expand the "footprint" of your pedal switches.
€15,00/kplKeskusvarastossa. Toimitusaika n.5-7 arkipäivää
-
Tuotenumero 1066127
Ernie Ball Ball EB-6220
Flat patch kaapeli 7,5 cm, 3-pack
€26,50/pakLähetettävissä: Heti Myymälässä
-
Tuotenumero 1061509
EB-6226, Patch Cable Flat 15 cm
Flat patch kaapeli, 15 cm
€11,00/kplLähetettävissä: Heti Myymälässä