Ibanez AF75-TRS Artcore - Transparent Red Sunburst

Ibanez AF75-TRS

The AF75-TRS belongs to the Ibanez Artcore series, which includes full-hollow and semi-hollow guitars designed for playability and quality. The series is suitable for both beginners and professional musicians, serving as an introduction to jazz or as a complementary instrument in a professional setup. The AF75 is a traditional model with a classic look, featuring a fully hollow body without a center block, made of Linden for the top, back, and sides.

Neck and Fingerboard

The neck is made of Nyatoh and set-in at the 14th fret. It has a medium-thick, slightly C-shaped Artcore profile for balanced playability. The fingerboard is bound Walnut with acrylic block inlays and medium frets, providing comfortable play across the entire neck.

Electronics and Hardware

The guitar is equipped with Ibanez Classic Elite humbuckers, connected to a three-way toggle switch with separate volume and tone controls for each pickup. The bridge is a Gibraltar Performer and the tailpiece a VT60, with all hardware finished in chrome.

Dimensions and Ergonomics

Scale length is 628 mm, neck width at the nut is 43 mm and 56.3 mm at the 20th fret. Neck thickness is 21 mm at the 1st fret and 24.4 mm at the 9th fret. Body dimensions are 19 1/2" in length, 15 3/4" in width, and 3 5/8" in maximum depth.

Specifications

• Series: Artcore
• Body: Linden top, back, and sides, fully hollow
• Neck: Nyatoh set-in
• Fingerboard: Bound Walnut with acrylic block inlays
• Frets: Medium
• Pickups: Classic Elite (H) neck and bridge, passive/Alnico
• Bridge: Gibraltar Performer
• Tailpiece: VT60
• Hardware: Chrome
• Neck profile: Scale 628 mm, nut width 43 mm, width at 20th fret 56.3 mm, thickness 21 mm at 1st fret, 24.4 mm at 9th fret, radius 305 mm
• Body dimensions: Length 19 1/2", width 15 3/4", max depth 3 5/8"
• Accessories: MF100C case, IHB541 gigbag (not included)