Kenton MIDI Line Driver

LNDR comes as a main and secondary pair that allows MIDI to be sent accurately in both directions at the same time, across distances of over 1000 metres (3280 feet) using a standard CAT5e cables – over 66 times the distance achievable using standard MIDI cables.

The LNDR MIDI Line Driver’s combination of balanced line drivers and twisted pair cable (CAT5e) gives a high degree of immunity to noise, which results in a very high degree of signal integrity – in plain language, a very reliable MIDI link over much greater distances than can be achieved with ordinary MIDI connections.

CAT5e cable is recommended: CAT5 cable will limit the transmission length to 100m. For distances over 100 metres, screened 24 AWG solid copper core CAT5e cable should be used.

CAT5e cable is not included (we don’t know what length you need!) Please see below for cables.

The CAT5e cable from an LNDR main unit should only be connected to an LNDR secondary unit, not to another main unit, and NEVER to any other device, even if it has a similar connector. (e.g. Ethernet).